Home > Windows 10 > Setupapi.log Windows 10

Setupapi.log Windows 10

Contents

After the installation is finished, the log is complete.The example command line uses the sample paths in this How-To. dvi:                {_SCAN_FILE_QUEUE} flq:                     ScanQ flags=620 flq:                          SPQ_SCAN_PRUNE_COPY_QUEUE flq:                          SPQ_SCAN_FILE_COMPARISON flq:                          SPQ_SCAN_ACTIVATE_DRP flq:                     ScanQ number of copy nodes=1 flq:                     ScanQ action=200 DoPruning=32 flq:                     ScanQ end Validity flags=620 CopyNodes=1 dvi:                {_SCAN_FILE_QUEUE exit(0, 0x00000000)} cpy:                               DrpGetFileProt Status=2 dwClass=0 flq:                               MoveFile: 'C:\Windows\system32\DRIVERS\SETB164.tmp' flq:                                     to: 'C:\Windows\system32\DRIVERS\xillybus.sys' cpy:                               DrpSetRegFileProt 'C:\Windows\system32\DRIVERS\xillybus.sys' Status=0 Legacy flq:                               Caller applied security to file 'C:\Windows\system32\DRIVERS\xillybus.sys'. So I decided to uninstall the driver, do a fresh wipe with Driver Fusion and CCleaner, and then revert back to 14.4 WHQL. ...when I installed 14.4, the exact same thing http://affglobe.com/windows-10/setupapi-dev-log-forensics.html

idb:                          Published 'xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.inf' to 'C:\Windows\INF\oem2.inf' idb:                          Published driver store entry 'xillybus.inf_x86_neutral_c6abbde6e922f176'. sig:      {_VERIFY_FILE_SIGNATURE exit(0x00000490)} 23:22:54.761 dvi:      Selected driver installs from section [Xillybus_Inst] in 'c:\windows\system32\driverstore\filerepository\xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.inf'. In this case the log file will be created in the "Windows\Temp" folder.This option should not be left active since every install/uninstall operation of an MSI package will create a new I put it in the recycle bin, but that didn't help. http://www.advancedinstaller.com/user-guide/qa-log.html

Setupapi.log Windows 10

dBforumsoffers community insight on everything from ASP to Oracle, and get the latest news from Data Center Knowledge. The solution was all in the logs at C:\Windows\Inf\setupapi.dev.log...it had said it found the driver already inside a folder at 'C:\WINDOWS\System32\DriverStore\FileRepository\' when in fact that folder was not present so I Please create a new text file with a ".reg" extension and then copy the following lines into it. inf:                Opened INF: 'c:\driver\xillybus.inf' ([strings]) inf:                Opened INF: 'c:\driver\xillybus.inf' ([strings]) flq:                {FILE_QUEUE_COPY} flq:                     CopyStyle      - 0x00000000 flq:                     SourceRootPath - 'c:\driver\i386' flq:                     SourceFilename - 'xillybus.sys' flq:                     TargetDirectory- 'C:\Users\tester\AppData\Local\Temp\{35bcaf49-eb0d-78a2-1a0a-42414908c360}\i386' flq:                {FILE_QUEUE_COPY exit(0x00000000)} flq:               

This command will create a verbose log which offers a lot of information about the installation. Any ideas? Setting bit 31 will add time stamps. Setupapi.dev.log Location Windows 10 Device ID 0x1601 Vendor ID 0x1022 Class Code 0x060000 Revision ID 0x00 Subsystem ID 0x0000 Subsystem vendor ID 0x0000 #3 Dankk, Aug 24, 2014 (You must log in or sign

On Windows 7, the file is C:\Windows\inf\setupapi.dev.log which can look like this when an unknown PCI device is detected by the system: >>>  [Device Install (Hardware initiated) - pci\ven_10ee&dev_ebeb&subsys_ebeb10ee&rev_00\4&27574d66&0&0008] >>>  Section Setupapi.dev.log Forensics Comments Edit Share Twitter Facebook | Theme Light Dark In this article Blog Privacy & Cookies Terms of Use Feedback Impressum Trademarks current community chat Super User Meta Super User your Note that any logging command line should have this form:msiexec /i /L*V After you use the logging command, you need to specify the log's complete path. a fantastic read Those XML files display fine by default in IE 9, 10 and 11 here.

Advertisement Join the Conversation Get answers to questions, share tips, and engage with the IT professional community at myITforum. Windows Installer Event Log dvi: Default installer: failed! !!! Using `\input` to insert a section of a document into another Should teachers enforce standardization of spacing and braces? The set bit 29 tells the logger not to flush data into the file after each entry (faster logging, but data can be lost on crashes).

Setupapi.dev.log Forensics

Dankk Diamond Member Joined: Jul 7, 2008 Messages: 5,524 Likes Received: 0 I decided to download and install the 14.7 RC3 Beta driver today. http://www.advancedinstaller.com/user-guide/qa-log.html Device ID 0x1605 Vendor ID 0x1022 Class Code 0x060000 Revision ID 0x00 Subsystem ID 0x0000 Subsystem vendor ID 0x0000 AMD Radeon Graphics Manufacturer Advanced Micro Devices, Inc. Setupapi.log Windows 10 The name of this log file is SetupAPI.dev.log, and it is located, by default, in the Windows INF file directory (%SystemRoot%\inf). Setupapi Log Location Windows 10 What type of transformer do I need for a 5Hz AC source?

All rights reserved. this content Therefore, if you launch an EXE package with logging parameters, these parameters will be used for creating the log.Automated logging with the Windows Installer Logging PolicyThe logging policy is particularly useful These options are:i - Status messagesw - Nonfatal warningse - All error messagesa - Start up of actionsr - Action-specific recordsu - User requestsc - Initial UI parametersm - Out-of-memory or If you have an AMD card, the reports are generated in C:\Program Files\ATI\CIM\Reports. #1 Dankk, Aug 23, 2014 Loading... Setupapi.dev.log Missing

  • sig:           {_VERIFY_FILE_SIGNATURE exit(0x00000490)} 23:22:54.823 dvi:           Selected driver installs from section [Xillybus_Inst] in 'c:\windows\system32\driverstore\filerepository\xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.inf'.
  • Trademarks belong to their respective owners.
  • dvi:      {Plug and Play Service: Device Install for PCI\VEN_10EE&DEV_EBEB&SUBSYS_EBEB10EE&REV_00\4&27574D66&0&0008} ump:           Creating Install Process: DrvInst.exe 23:22:54.761 ndv:           Infpath=C:\Windows\INF\oem2.inf ndv:           DriverNodeName=xillybus.inf:MSFT.NTx86:Xillybus_Inst:1.0.0.0:pci\ven_10ee&dev_ebeb ndv:           DriverStorepath=C:\Windows\System32\DriverStore\FileRepository\xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.inf ndv:           Building driver list from driver node strong name...
  • XP writes the netsetup.log file to the \%systemroot%\debug folder.
  • inf:                Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.inf' ([strings]) inf:                Saved PNF: 'C:\Windows\System32\DriverStore\FileRepository\xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.PNF' (Language = 0409) ndv:                Found device that matches new INF!

How to "decipher" the symbol for the recently announced doubly-charmed baryon? Therefore, if you launch an EXE package with logging parameters, these parameters will be used for creating the log.Automated logging with the Windows Installer Logging PolicyThe logging policy is particularly useful Device ID 0x1603 Vendor ID 0x1022 Class Code 0x060000 Revision ID 0x00 Subsystem ID 0x0000 Subsystem vendor ID 0x0000 AMD Radeon Graphics Manufacturer Advanced Micro Devices, Inc. weblink flq:                                    Inf     : 'c:\windows\system32\driverstore\filerepository\xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.inf' flq:                                    SourceInf: 'c:\windows\system32\driverstore\filerepository\xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.inf' flq:                                    SourceSection: [sourcedisksfiles] flq:                                    Source root path based on SourceInf flq:                                    SourceRootPath: 'C:\Windows\System32\DriverStore\FileRepository\xillybus.inf_x86_neutral_c6abbde6e922f176' flq:                                    {FILE_QUEUE_COPY} flq:                                         CopyStyle      - 0x00000000 flq:                                         {FILE_QUEUE_COPY} flq:                                              CopyStyle      -

The INF file for the device driver controls device installation, and the SetupAPI logs record a series of entries corresponding to each instruction in the INF file, along with whether the Windows Driver Logging Time = 9766 ms sto:                Imported driver package into Driver Store: sto:                     Filename = C:\Windows\System32\DriverStore\FileRepository\xillybus.inf_x86_neutral_c6abbde6e922f176\xillybus.inf sto:                     Time     = 9875 ms sto:           {Import Driver Package: exit(0x00000000)} 23:22:54.558 inf:           Opened INF: 'c:\driver\xillybus.inf' ([strings]) How Rigorous must my Set Theory Proof be?

How do you make your CS lectures more interesting?

The above options can be used only after this parameter (the options cannot be used by themselves).Create a logThe most used logging command is /L*V. First Time Here? setupapi.log-XP writes information to the setupapi.log file each time a .inf file executes, including any errors. Windows Installer Log File Location After this, double click the ".reg" file you just created and answer "Yes" to the confirmation prompt.REGEDIT4 [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer] "Logging"="voicewarmup" "Debug"=dword:00000007The .LOG file will be created in the currently logged on user's

So, all I had to do then was use the same Catalyst installer to install my drivers again even though Catalyst was already installed on my system (don't worry, Catalyst handles The logging options offered by this tool allow you to create different types of logs, depending on the information you need about the installation. The above options can be used only after this parameter (the options cannot be used by themselves).Create a logThe most used logging command is /L*V. http://affglobe.com/windows-10/iastor-sys-driver-windows-10.html Anyways, it seems the install succeeded and I see the current Catalyst drivers up on my computer and up to date, so everything worked smooth like butter.

Therefore, a command line which creates a log for an uninstall can look like this:msiexec /x "C:\MyPackage\Example.msi" /L*V "C:\log\example.log"The package path can also be replaced by the package Product Code (it I now have everything on C:\ and have erased and reformatted D: to be blank now. In order to disable the debugging policy, you can delete the registry values you have previously added using "RegEdit.exe" or you can import the following .reg file as you did with XP writes the comsetup.log file to the %systemroot% folder.

So I uninstalled the entire software package with the intention of re-installing it (to C: drive, of course). Device ID 0x1600 Vendor ID 0x1022 Class Code 0x060000 Revision ID 0x00 Subsystem ID 0x0000 Subsystem vendor ID 0x0000 AMD Radeon Graphics Manufacturer Advanced Micro Devices, Inc. Device ID 0xaab0 Vendor ID 0x1002 Class Code 0x040300 Revision ID 0x00 Subsystem ID 0xaab0 Subsystem vendor ID 0x1462 AMD Radeon Graphics Manufacturer Advanced Micro Devices, Inc. If you want the log to be created next to the MSI, you can specify only the name of the log file:msiexec /i "C:\MyPackage\Example.msi" /L*V "example.log"When the package is included in

No, create an account now. Learn How to Post and More  Community News  Best of the Community Blog  Notebooks Notebook Operating System and Recovery  Notebook Boot and Lockup  Notebook Wireless and Networking  Notebook Audio  Notebook Video, I did as you suggested, but it didn't fix the problem. dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 13:40:16.824 ndv: {Core Device Install} ndv: Device install status=0xe0000203 ndv: Performing device install final cleanup...

Edit: Success. Click here to view the report log." This never happens to me. Device ID 0x5a19 Vendor ID 0x1002 Class Code 0x060400 Revision ID 0x00 Subsystem ID 0x7640 Subsystem vendor ID 0x1462 AMD Radeon Graphics Manufacturer Advanced Micro Devices, Inc. Also, these parameters can be always passed to the MSI when the package is launched through the EXE bootstrapper.If you want your installation package to always create a log, you can

Useful Searches Recent Posts Menu Forums Forums Quick Links Search Forums Recent Posts Menu Log in Sign up AnandTech Forums: Technology, Hardware, Software, and Deals Home Forums > Hardware and Technology XP writes the setup.log file to the \%systemroot%\repair folder. Device ID 0x5a1a Vendor ID 0x1002 Class Code 0x060400 Revision ID 0x00 Subsystem ID 0x7640 Subsystem vendor ID 0x1462 AMD Radeon Graphics Manufacturer Advanced Micro Devices, Inc.